Description
ProRep Heater Guards | Kings Heath Pet Centre
Protect reptiles, amphibians and invertebrates from burns powder-coated steel guards for spot lamps, ceramic heaters and heat projectors.
A heater guard does one job that matters: it keeps your animal away from the heat source that keeps it alive. What’s more, reptiles, amphibians and invertebrates don’t always sense heat the way mammals do, so an animal pressing against an exposed bulb can be injured before it moves away. On top of that, none of that comes at the cost of your setup every ProRep guard lets heat and light through while keeping the animal out of reach.
Why Guards Are Not Optional
An exposed heat source inside a vivarium is a burn risk, whatever the wattage. Which means a guard isn’t an accessory to buy later it’s part of setting up the lamp itself. As a result, fit the guard at the same time as the heater, not after something goes wrong.
They don’t block the heat. Each guard is built from powder-coated steel mesh, so heat and light transfer through while the animal stays out of direct contact.
And maintenance stays simple. Every guard in this range opens for lamp changes without being removed from the vivarium, so fitting one doesn’t make your routine harder.
The Range
| Guard | Dimensions | Suits |
|---|---|---|
| Standard Rectangular | 12 x 12 x 17cm | Spot lamps and small ceramic heaters |
| Large Rectangular | 12 x 12 x 22cm | Larger heat sources and taller enclosures |
| Ex-Large | 17 x 17 x 21.5cm | Large heat bulbs, ceramic heaters and ProRep Heat Projectors |
Match the guard to what’s hanging in the vivarium. Rectangular for spot lamps and small ceramic heaters; Large Rectangular where the heat source is bigger or the setup taller; Ex-Large for large heat bulbs, ceramic heaters and Heat Projectors.
Fitting Any ProRep Guard
- Fit the guard around the heat source so the bulb, ceramic heater or heat projector is fully enclosed and out of reach.
- Mount it inside a wooden vivarium using the brackets and screws supplied.
- Use the cable cut-out where one is supplied, so no wire is pinched between the guard and the vivarium.
- Close and secure the fasteners — the rectangular guards have hinged panels with double security fasteners.
- Always ensure the guard is secured before switching on the heat source.
- Test the temperature at the basking spot after fitting. A guard sits between the heat source and the animal and can slightly reduce the heat reaching the basking area — check with a thermometer and adjust the fixture height if needed.
- Check the guard remains firmly attached whenever you’re maintaining your heat source.
Care
Wipe the guard clean with warm soapy water and dry it fully before refitting. Check the fasteners and brackets periodically, particularly if your animal climbs near the heat source.
Frequently Asked Questions
Do I really need a heater guard? Yes — any heat source inside a vivarium should be guarded. Reptiles, amphibians and invertebrates don’t always sense heat the way mammals do, so burns can happen quickly.
Which guard do I need? Match it to your heat source. Standard Rectangular suits spot lamps and small ceramic heaters, Large Rectangular suits larger heat sources or taller enclosures, and Ex-Large suits large heat bulbs, ceramic heaters and ProRep Heat Projectors. Ask us in store if you’re unsure.
Will a guard reduce the heat reaching my animal? It can slightly, because it sits between the heat source and the animal. Check the basking temperature with a thermometer after fitting and raise or lower the fixture if needed.
Does it block the light? No — the powder-coated steel mesh allows maximum light and heat transfer while keeping the animal out of reach.
How do I change the bulb? Each guard opens for lamp changes without being removed from the vivarium.
What’s included with each guard? Four mounting brackets, a cable cut-out and screws with the standard and large rectangular guards; mounting screws with the Ex-Large.
How do I clean it? Wipe with warm soapy water and dry fully before refitting, and check the fasteners are secure.
Where can I buy ProRep heater guards in Birmingham? Find them in store at 43 York Road, Kings Heath, Birmingham (B14 7SA). Call ahead on 0121 444 1880 to check which sizes we have before you set off. We welcome customers from across Moseley, Stirchley, Harborne, Hall Green, Selly Oak, Shirley, Northfield, and Solihull.
Buy ProRep Heater Guards at Kings Heath Pet Centre
Pop into our York Road shop in Kings Heath, or call ahead on 0121 444 1880 to check availability.







